SciELO - Scientific Electronic Library Online

 
vol.23 número2Fracture Resistance of Teeth Restored with Bulk-Fill and Fiber-Reinforced Composites in Class II CavitiesEffects of Fixed and Removable Space Maintainers on Dental Plaque and DMFT/dft Values índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Odovtos International Journal of Dental Sciences

versión On-line ISSN 2215-3411versión impresa ISSN 1659-1046

Resumen

OVIEDO-QUIROS, Jorge; CAMPOS-ZUMBADO, José; HERNANDEZ-MONTOYA, Diana  y  LINES-GUTIERREZ, María Fernanda. Impresión 3D de modelos estereolitográficos con protocolo abierto. Odovtos [online]. 2021, vol.23, n.2, pp.126-136. ISSN 2215-3411.  http://dx.doi.org/10.15517/ijds.2020.43185.

A descriptive and exploratory study was carried out with the aim of proposing and validating an open protocol for making 3D impressions of stereolithographic models, which is available to professionals in the area of Dentistry. Nine operators (senior students of the Dentistry degree), without previous experience in the use of software and hardware for 3D printing, divided into two groups were trained through theoretical and practical sessions. The A worked with three helical tomographies (TAC) and the B with three cone beam computed tomography (CBCT), all in DICOM format, converted to STL files. In total, 99 bone structures corresponding to 33 jaws, 33 axis and 33 facial masses-skull bases were analyzed, and a total of 33 jaws were printed in PLA (polylactic acid filament). At the end of the study, no statistically significant difference was found in the implementation of the proposed protocol between the operators, the measurements of the pieces printed by each of them, the gold standard, the TAC and the CBCT, with which not only validated the protocol, but it was possible to determine the resources necessary to carry out this type of 3D printing.

Palabras clave : Tomography; Stereolithography; Computer aided design; Printing, Three dimensional; Jaw.

        · resumen en Español     · texto en Español     · Español ( pdf )