SciELO - Scientific Electronic Library Online

 
vol.22 número1Remineralizing Effect of Xilitol, Juniperus Communis and Camellia Sinensis Added to a Toothpaste: An In Vitro StudyIn Vitro Effect of Temperature on Dentin Bond Strength of Universal Adhesive Systems índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Odovtos International Journal of Dental Sciences

versão On-line ISSN 2215-3411versão impressa ISSN 1659-1046

Resumo

ŞIşMANOğLU, Soner; GUMUşTAş, Burak  e  YıLDıRıM-BILMEZ, Zuhal. Effect of Polishing Systems on Fluoride Release and Surface Roughness of Different Restorative Materials. Odovtos [online]. 2020, vol.22, n.1, pp.81-92. ISSN 2215-3411.  http://dx.doi.org/10.15517/ijds.2020.39151.

Secondary caries is an important factor in the replacement of the restorations, and it is thought that fluoride-releasing materials may prevent this problem. Furthermore, the fluoride release of the materials may be increased by polishing process. Available knowledge about the effect of polishing systems (PS) on the fluoride release of materials is limited. Therefore, this study was conducted to evaluate the effect of PS on the fluoride release of fluoride-containing materials. Restorative materials were divided into 6 groups: Fuji IX GP, Fuji II, Dyract XP, Beautifil II, Beautifil-Bulk, and Filtek Ultimate. Each group was also divided into four subgroups: Mylar strip, Sof-Lex Discs, Sof-Lex Diamond, and OneGloss. Fluoride release was determined using a fluoride ion-selective electrode. Surface roughness was evaluated with a profilometer. Two- way repeated measure and one-way ANOVA tests were used for statistical analysis. The initial rapid fluoride release was observed only in Fuji IX. The PS increased the fluoride release of Fuji IX and Fuji II and Dyract XP materials while reducing the fluoride release of resin-based materials. The highest surface roughness values were obtained with OneGloss. Further, a significant relationship between fluoride release and surface roughness was found. The polishing provides an increase in fluoride release, especially in glass-ionomer-based materials. This article revealed that there is a relationship between fluoride release and surface roughness. Proper PS must be chosen according to the material to provide the best clinical benefits in terms of fluoride release and surface roughness.

Palavras-chave : Compomers; Composite resins; Dental materials; Fluorides; Glass ionomer cements.

        · resumo em Espanhol     · texto em Inglês     · Inglês ( pdf )