SciELO - Scientific Electronic Library Online

 
vol.21 issue2Fluoride Release of Giomer and Resin Based Fissure SealantsDoes Sterilization Affect the Push Out Bond Strength of Experimental Dentin Posts? author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • Have no similar articlesSimilars in SciELO

Share


Odovtos International Journal of Dental Sciences

On-line version ISSN 2215-3411Print version ISSN 1659-1046

Abstract

ATAY, Ayşe; PALAZLI, Zülal; GURDAL, Işıl  and  UşUMEZ, Aslıhan. Color Change of Different Dual-Cure Resin Cements After Thermocycling. Odovtos [online]. 2019, vol.21, n.2, pp.53-62. ISSN 2215-3411.  http://dx.doi.org/10.15517/ijds.v0i0.36783.

The purpose of this study is to evaluate the effect of thermocycling on the color change of the amine-free dual-cure resin cements. IPS e.max CAD blocs were cut into specimens of 1 mm thickness (N=28) and cemented with one of the 4 different amine-free dual-cure resin cements (NX3 Nexus [NX], Kerr Dental; Variolink Esthetic DC [VE], Ivoclar Vivadent; Panavia V5 [PV], Kuraray Dental; G-CEM Linkforce [GC], GC Corporation) (n=7). A spectrophotometer was used for color measurements. Specimens were subjected to thermocycling (5°C and 55°C; 5000 and 10000 cycles). Normality of data distribution was tested by using the Kolmogorov-Smirnov test. Statistical analysis was performed using a two-way analysis of variance (ANOVA) and Tukey’s multiple comparison tests at a significance level of p<0.05.∆E values were significantly influenced by the resin cements and the cycle periods (p<0.05). There were no significant differences between NX and VE groups after 5000 thermocycling, however after 10000 thermocycling VE group showed higher ∆E1 values than NX group (p>0.05). There were no statistically significant differences between the ∆E0 and ∆E1 values of the GC group, however the other groups were affected after 10000 thermocycling (p>0.05). Amine-free resin cements used for cementation showed color change after thermocycling except GC group. All resin cements were showed clinically acceptable color change after thermocycling (∆E<3.5).

Keywords : Resin cements; Prosthesis Coloring; Aging.

        · abstract in Spanish     · text in English     · English ( pdf )