SciELO - Scientific Electronic Library Online

 
vol.33 número1Evaluation of different text representation techniques and distance metrics using KNN for documents classificationDeterminación de la exposición ocupacional a vibraciones en cuerpo entero en conductores de autobús en una parte del Gran Área Metropolitana, Costa Rica índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Revista Tecnología en Marcha

versión On-line ISSN 0379-3982versión impresa ISSN 0379-3982

Resumen

FERREIRA-ALTHMAN, Michael Patrick; SOUZA, Saulo Fernando; SILVA-ALVES, Luiz Henrique  y  RAMOS-GOMES, Gustavo. Monitoring the vertical oscillation of a spray bars through an electronic system. Tecnología en Marcha [online]. 2020, vol.33, n.1, pp.80-87. ISSN 0379-3982.  http://dx.doi.org/10.18845/tm.v33i1.5023.

The aim of the present work was to develop and implement a system for the monitoring of the sprayer bar to obtain measurements of the vertical height of the bar, in order to provide more information at the moment of application and to facilitate its handling . The experiment was carried out at the Experimental Farm Lageado - FCA / UNESP of Botucatu. To perform the spraying, a Honda Fourtrax quadricycle was used, equipped with a 3 m spray bar working at an average speed of 6 km h -1. The tip used in the test was the AIXR11002 and the spacing between nozzles 0.50 m, totaling 6 nozzles. The spray bar was positioned at a height of 0.60 m in relation to the ground and in two situations of terrain: regular (little oscillation of bar) and irregular (much oscillation of bar). In this way, the data were collected by sensors and then sent to the arduino, which is a microcontroller, which can be controlled directly by the computer. In addition, oscillation with and without spraying was tested to test possible problems in the operation of the equipment. Analyzing the interaction of the treatments and working conditions of the sprayer bar with and without obstacles, and with and without spraying, there was no significant difference between treatments 1 compared to treatment 4 in relation to bar height in (cm), in terrain with obstacles. However, treatments (Treatment 2) and (Treatment 3) presented lower vertical oscillations of the bar. With this, in the spraying performed on flatter surfaces, there is less vertical movement of the bar, thus increasing the quality and efficiency of the application. The use of the electronic monitoring system, was efficient for the use during work, being possible to realize the readings of the vertical oscillations of the bar, besides evaluating the temperature and relative humidity of fast and efficient form. In all tests, the results of the readings were similar in each treatment, making clear that the information collected by the system are reliable.

Palabras clave : Agricultura de precisão; Pulverizador; Tecnologia de Aplicação; Tecnologia embarcada.

        · resumen en Portugués     · texto en Español     · Español ( pdf )