SciELO - Scientific Electronic Library Online

 
vol.30 número3Radiografía Industrial: comparación entre el método tradicional y digital empleando rayos X índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Revista Tecnología en Marcha

versión On-line ISSN 0379-3982versión impresa ISSN 0379-3982

Resumen

LORIA-GARCIA, Ana Laura; VILLALOBOS-GRANADOS, Edgardo Mateo  y  PIEDRA-SANTAMARIA, Carlos. Maintenance decision making model based on useful life prediction for wind power generation systems components installed in Costa Rica. Tecnología en Marcha [online]. 2017, vol.30, n.3, pp.129-141. ISSN 0379-3982.  http://dx.doi.org/10.18845/tm.v30i3.3279.

This study covers a maintenance decision making model, where condition monitoring is applied to rotating components of horizontal axis wind power generation systems installed in Costa Rica, in order to reduce the incidence of unexpected failures, which are consequences of the run-to-failure policy or following strictly the manufacturers’ suggestions without considering the operational environment, very common practices in the national wind industry.

Aiming the optimization of operation and maintenance costs, a model where two failure probability threshold values are defined is presented. These threshold values allow the component replacement decision making. Moreover, the initial guidelines for executing this strategy in a wind farm are offered in this paper.

The life percentage predictions required by the offered model, are obtained using artificial neural networks for each component (rotor, main bearing, gearbox and electric generator), which use representative condition monitoring variables as inputs.

Palabras clave : Reliability; Wind Turbines; Artificial Neural Networks; Cost Optimization.

        · resumen en Español     · texto en Español     · Español ( pdf )